For radial products, rings and discs, we offer a "burn and turn" product. Blanks are plasma cut and then machined leaving a clean, precise, machine cut edge with no heat affected zone (HAZ). These products are of particular interest to finish machine shops who want to save wear and tear on expensive, precision CNC equipment.

Burn and turn products are also of use to fabricators and end-users with direct use applications where no secondary machining operations are performed. The consistent dimensional tolerances of our burn and turn products minimize labor costs during fit-up and final assembly.

Burn and turn blanks ready for your finish machining operations.

When extensive finish machining operations are required, machined all over blanks are your best choice. These high quality blanks are machined on all surfaces, ready for your finish machine shop or in-house machining facility.

Machined all over products also offer precise flatness tolerances not available from plate.

Plate gauges are generally limited to 5". If your requirement exceeds this limit we also offer a machined all over from forging product. All forgings are fully annealed, SA182 forgings and offer the same quality finish as our plate products.

In addition to machine cut blanks, we also produce finish machined products to your exact specifications. You can save time and reduce freight and finish machining costs by using our one-source finish machined products.

Our rectangular milled products are an excellent choice for parts which must later undergo polishing. Blanks for cutouts can be shipped with your finished parts to simplify polishing operations.

Spot face, drilling and tapping operations are also available for baffle plates and machine assemblies.

Milled products from plate are also an alternative when extruded flat bar products are unsuitable or unavilable.

When secondary edge details are required or when the profile must be machined for aesthetic reasons, we provide full CNC profile milling of your parts. Accurate and repeatable profile dimensions simplify the setup and fixturing of additional machining operations and also reduce tool and equipment wear.

Profile milled plate products offer superior profile tolerance and are ideal for any application where a plasma cut edge is unsuitable.

All tube sheet products begin with a machined all over disc. Precise hole location and hole dimensional tolerances assure easy integration into your finished product.

If your in-house facility has trouble working in stainless or you just need more capacity during busy times, our tube sheet products can be an convenient and economical alternative.

When outside edge and cutout tolerance are less critical, we offer a burned and drilled product. Typically used for machine mounting plates, this product offers the best of both worlds.

Close tolerance plasma cutting and precision drilled or drilled and tapped holes lead to a "tolerance where it counts" approach that produces a cost effective product with minimal lead times.